Turnkey Solutions
We'll get back to you as soon as possible.
OPM offers the supply of turnkey plants for the AFR Cement Co-Processing production line. including the following steps:
a. RDF Pellets Production line
· Four Shaft Shredder
· Dewatering Screw Press .
· RDF pellet mills
· AFR feeding System
b. Hydraulic Baler Production line
· Hydraulic Baler
· AFR feeding System
(Steam Explosion technology-EFB and Woody Material)
OPM offers the supply of turnkey plants for the production of black pellets production line
including the following steps:
a. Wood Black Pellets Production line
· Chipper
· Hammer Mills .
· Steam Explosion reactor
· Single Pass Dryer
· Wood Pellet mills
b. EFB Black Pellets Production line
· Shredder
· Steam Explosion reactor
· Low temperature Single Pass Dryer or mesh dryer.
· EFB Pellet mills
OPM offers the supply of turnkey plants for the production of EFB briquettes production line for CPO mills including the following steps:
· Shredder
· Low temperature mesh dryer or single pass dryer
· EFB pellets (briquettes) machine
OPM offers the supply of turnkey plants for the production of Sludge pellets
including the following steps:
· MDS multi-disc Screw Press (or Filter Press)
· Low Temperature Mesh Dryer for sludge drying
· Hammer mills for sludge
· Sludge Pellet mills
· Sludge pellets Gasifier for CHP application
OPM offers the supply of turnkey plants for the production of biochar pellets
including the following steps:
· Mixer the biochar with moisture and industrial Starch.
· Pellet mill.
· Cooler for pelletizing chamber.
· Pellets Storage: loading system to truck, rail, wagon and navy.
OPM offers the supply of turnkey plants for the production of RDF pellets or briquettes including the following steps:
· MSW sorting line (include Pre-Shredder, Trommel separator, Air Seperator, Secondary Shredder, RDF shredder)
· AI optical Picker
· Magnetic Seperator to get rid of Metal inside.
· Dewatering Press to reduce the moisture of RDF inside
· Milling and pelletizing(briquetting) line
· Hydraulic RDF Baler
OPM offers the supply of turnkey plants for the production of RPF pellets or briquettes including the following steps:
· Twin Shaft Shredder or four shaft shredder for RDF fluff.
· Magnetic Seperator to get rid of Metal inside.
· Dewatering Press to reduce the moisture of RDF inside
· Milling and pelletizing(briquetting) line
· Pellets Storage: loading system to truck, rail, wagon and navy
• To increase the efficiency of Reactor, raw material could be granulated(pelletized)
• The density of raw material can be Twice so efficiency of reactor can be double
Biogas purification with membrane technology - achieving the highest possible methane yield through membranes with high separation efficiency.
At the core of our biogas upgrading system lies membrane technology. In addition to biogas upgrading, OPM can also provide technology for landfill gas upgrading. Biogas upgrading makes use of membrane technology whereas landfill gas upgrading makes use of membrane technology in combination with PSA technology. All upgrading systems benefit from the add-on of a CO2 Liquefaction technology. This enhances CO2 recovery, further improving the Carbon intensity (CI) score.
* OPM Straw-oriented Pellet Mills
Combine milling and pelletizing, suitable for 30% moisture of raw wheat straws, paddy straws, etc.
Reduce size of straws from 30-50mm to 2-3mm, biogas harvest will be arised by 11%.
* OPM Powerful Steam Explosion Reactor
Shorten the fermentation time of raw biomass from 28 days to 3-7 days, the scale of investment of AD tank can be reduced by 90%, only 10% of investment of existing AD tank.
* OPM Three stages of Membrane biogas upgrading plants
Combine H2S clean and biogas purification units into 40ft container as mobile unit, C02 content of final biogas output will be less than 2%.
OPM offers the supply of turnkey plants for the Pretreatment of raw material for biogas plants (2G Bio-Ethanol) including the following steps:
· Coarse Shredder for Fiberous material like Corn Stalks/Corn Stover/Paddy Straws
Napier Grass, EFB, Wheat Straws, etc.
· Combine Milling and Pelletizing Machine.
· Shorten the fermentation time from 28 days to 3-7 days by using Steam Explosion.
· Pelletize the Sludge from AD tank as the alternative fuel for power plant.
MHF PYROLYSIS CARBONIZER
Designed for CDM and CORC certificate.
Investment and operation of biogas purification and natural gas systems.
Investment and operation of associated petroleum gas decarbonization systems.
Investment and operation of oilfield nitrogen injection systems,distribution of core biogas membrane components.
Equipment leasing and project investment.
Industrial intelligent digitalization, Internet of Things, DCS systems, and industrial control systems.
Glass-Fused-to-Steel (GFS) Bolted Tank Technology is an advanced tank construction method. It begins with the selection of special high-strength steel, specifically engineered for enameling, as the base substrate. Through a specialized firing process, a highly inert, anti-corrosion vitreous enamel layer is fused to the substrate surface. This process creates standardized steel panels, or modules.
These modules are then packed and shipped to the construction site. There, they undergo a rapid and efficient installation process with minimal resource consumption, culminating in the final assembly of the tank structure.
Compared to other tank types (such as concrete tanks, welded steel tanks, and Lipp tanks), GFS bolted tanks represent a significant innovation in materials, corrosion protection technology, and installation methodology. It is a globally recognized, mature, and advanced tank construction technology.
In the production of (bio-)LNG, a market standard at the inlet of a liquefaction process is <50 ppm CO2. This limit is set due to the risk of freeze-out/crystallization of CO2 in the LNG liquefaction process. Common methods to reduce the CO2 concentration at the inlet of the liquefaction process typically include amine scrubbing or thermal swing adsorption (TSA).
Project Time: 2019
Location: Linfen City, Shanxi Province
Raw Gas: Coalbed Methane
Scale: 90,000 cu.m./day
The LNG Liquefaction Skid is a modular system integrating gas pretreatment, cryogenic
liquefaction (-162°C), and storage. Designed for distributed energy and small-scale gas fields, it
features rapid deployment, low energy consumption (<0.35 kWh/Nm³), and compact LNG storage
(1/600 volume reduction), ideal for remote or offshore applications. Because of our standard design,
lead time can be squeezed to as short as 5-7 months.
OPM offers the supply of turnkey plants for the production of pellets including the following steps:
· Wood processing (debarking, chipping and rechipping)
· Storage, cleaning and dosing of the raw material
· Thermal drying
· Milling and pelleting line
· Pellets Storage: loading system to truck, rail, wagon and navy